Thermoregulator RIZUR-TB-DCS
The hardware-software solution ensures that the temperature will be maintained within the accuracy of 1 °С. The temperature parameters are programmed at the manufacturing facility on the basis of the ordering information. For the purpose of signalizing when the temperature surpasses the set limits, thermoregulator RIZUR-TB-DCS has additional relay outputs, as well as, depending on the design version, an analogue output signal 4-20mА.
The housing of the thermoregulator also performs the function of a junction box, meaning that there's a terminal block inside and Ex-protected cable glands for power cables, heater, and temperature sensors outside.
Thermoregulator RIZUR-TB-DCS is designed specifically for controlling heating elements of high power (up to 5kW), including self-regulating heating cables.
The thermoregulator can withstand the cold starting loads that surpass the nominal power load in 10 times.
Thermoregulator RIZUR-TB-DCS has three design variants:
- Preset temperature limit alarm when the temperature of the control medium/space rapidly increases/decreases
- Control of the high capacity heaters
- Control of the heating systems based on self-regulating or resistive heating cables for pipelines, tanks, reservoirs.
RIZUR-TB-DCS-1
RIZUR-TB-DCS-1 - this version has two digital temperature sensors RIZUR-TD and two relay outputs for signalizing when the temperature surpasses set limits causing an emergency.
Thermoregulator RIZUR-TB-DCS-1 can change and control the temperature within the limits from
- 50°С to +110°С.
Thermoregulator RIZUR-TB-DCS-1 can change and control the temperature within the limits from
- 50°С to +110°С.
RIZUR-TB-DCS-3
RIZUR-TB-DCS-3 - this version has two temperature sensors RT 100 and two relay outputs for signalizing when the temperature surpasses set limits causing an emergency. Thermoregulator RIZUR-TB-DCS-3 can change and control the temperature within the limits from -200°C to +600°С.
RIZUR-TB-DCS-4
This version has two digital temperature sensors RIZUR-TD, one relay output, and one analogue output signal 4-20mА.
Thermoregulator RIZUR-TB-DCS-4 can change and control the temperature within the limits from
-50°С to +110 °С. The relay output signal is for signalizing when the temperature surpasses set limits causing an emergency.
The analogue output signal 4-20mА is for broadcasting the current temperature value.
Thermoregulator RIZUR-TB-DCS-4 can change and control the temperature within the limits from
-50°С to +110 °С. The relay output signal is for signalizing when the temperature surpasses set limits causing an emergency.
The analogue output signal 4-20mА is for broadcasting the current temperature value.
Application area:
- Temperature control in the heating area: enclosures, soft enclosures and insulation jackets, facility spaces- Preset temperature limit alarm when the temperature of the control medium/space rapidly increases/decreases
- Control of the high capacity heaters
- Control of the heating systems based on self-regulating or resistive heating cables for pipelines, tanks, reservoirs.
| Design variant | RIZUR-TB-DCS |
| Installation area |
General industrial areas Explosion hazard zones V-1а and V-1g acc. to Ch. 7.3 of PUE |
| Explosion protection marking | 1ExdllCT6GbX |
| Temperature control | Digital control system |
| Heating element power | Up to 1000 W |
| Supply voltage |
220 (±15%)V, 24,36-48 V AC/DC (upon an agreement with the manufacturer) |
| Temperature maintained on the surface | -30°С … +90°С, an increment of 1°С |
| Temperature maintained inside | -40°С … +50°С, an increment of 1°С |
| Ingress protection | IP67 |
| Preset temperature limit alarm | Relay, dry contact, 1А |
| Warranty period | 24 months |
| Average operation time | Over 15 years |
