Heater RIZUR-TERM-M 230 V

Explosion-proof heaters RIZUR-TERM are used to prevent condensation, protect the electric and electronic components from freezing, and maintain the required temperature in heating enclosures (thermoboxes) for equipment, automation cabinets, heated cabinets, various jackets and boxes, including explosion-hazardous areas and external facilities. Heating element on a basis of PTC ceramics.

Intended use and application area

Explosion-proof heaters RIZUR-TERM manufactured by OOO «NPO RIZUR» comply with TU-3442-001-12189681-2014 and, depending on configuration, comply with GOST R MEK 60079-0-2011, GOST IEC 60079-1- 2011 for electric equipment with explosion protection “explosion-proof enclosure(d)” and to GOST R MEK 60079-18-2012 for “compound sealing(m)”.
Explosion-proof heaters RIZUR-TERM are used to prevent condensation, protect the electric and electronic components from freezing, and maintain the required temperature in heating enclosures (thermoboxes) for equipment, automation cabinets, heated cabinets, various jackets and boxes, including explosion-hazardous areas and external facilities.

Wide range of design variants that differ in the nominal power allows to choose a suitable version for heating either small spaces (soft enclosure, enclosure, safety shield, etc.) or big ones (block-boxes, warehouses, production departments, work-shops, gas distribution substation, boiler houses, compressor stations, etc.)

The design of RIZUR-TERM heater series is of high quality and thus ensures high-class protection against overheating and voltage surges; the heaters show steady performance and high reliability in field operating conditions. Their warranty time is 36 months, and the average operation time is over 15 years.

Design description

The heater consists of a section-shaped radiator made of aluminum alloy with powder-polymer coating. The shape is designed to optimize heating functionality. Inside the radiator, there is a high-endurance ceramic heating element on a basis of ceramic (PTC) semi-conductors that are sensitive to temperature changes. Electric resistance is in non-linear dependence with the heating temperature – when the temperature rises, the resistance of the ceramic heating element rises significantly, restricting the passing current and stopping the rise in temperature. Thanks to the self-regulating properties of the ceramic heating elements, RIZUR-TERM heaters on the basis of PTC-ceramics do not require stabilizing components or protection against surface overheating which means that the heater is fail-safe and has a longer service life.

The explosion protection is accomplished with a special explosion-proof housing. A special version of RIZUR-TERM heater is available – with the electric heating element and other elements in the metal housing sealed with a sealing compound. Protection from surface overheating is ensured by the area size of the outer surface, corresponding to the nominal power of heat generation, as well as (optional) by an added temperature sensor (analogue or digital, depending on specific versions) to switch off at a set maximum temperature. Thanks to the precise design and high-quality components, we can provide a 10-year warranty for heaters of this series.

The heaters are shipped with mounting components.

Fastening variants for RIZUR-TERM-М:

ТЕРМ-M-дин-рейка2.png ТЕРМ-M-уголки2.png ТЕРМ-M-напольный-кронштейн2.png ТЕРМ-M-комбинированный-крепеж2.png
ТЕРМ-M-боковой-кронштейн2.png ТЕРМ-M-фронтальный-кронштейн2.png ТЕРМ-M-монтажная-пластина2.png

Advantages of RIZUR-TERM heaters on the basis of PTC-ceramics:

  1. Self-regulation

  2. Energy efficiency

  3. High power density

  4. Small size

  5. Fail-safety

  6. Absence of additional components that can result in higher risks of equipment failure, for example, the in-built thermostats

  7. Long service life

Подробнее Скрыть

Technical specifications

Installation area

General industrial areas

Explosion hazard zones V-1а and V-1g acc. to Electrical installation code (PUE), Ch. 7.3

Explosion-proof marking general purpose industrial version
1 Exd IIС (T3...T6) Gb X
1 Exmb IIC (T3...T6) Gb X
Heating element power 30  ... 300 W
Power supply voltage 230 (±15%) V AC
Temperature on the heater’s surface In accordance with the temperature rating:
T4 - up to +135 ºС
T5 - up to +100 ºС
T6 - up to +85 ºС
-30 … +110°C, an increment of 1°С (with digital thermoregulators manufactured by RIZUR)
Temperature maintained +10...+20°C (with thermoregulators on the base of a bimetallic thermostat)
-40 … +110°C, an increment of 1°С with digital thermoregulators manufactured by OOO "NPO RIZUR"
Ingress protection
IP67 acc. to GOST 14254-96
Insulation strength min. 1500 V
Insulation resistance min. 20 МОhм
Protection against electrical shock  class 1 acc. to GOST
Warranty period 36 months
Average operation time over 15 years

Send request