Protective sleeves RIZUR for the temperature sensors
Sleeve type | GZ-015 | GZ-016 | GZ-017 | |||||||
---|---|---|---|---|---|---|---|---|---|---|
Design |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||
Modification | Protective complex nozzle (welded) sleeves |
Single piece nozzle protective sleeves |
Weld-on single-walled protective sleeves |
Flanged protective sleeves |
||||||
Configuration |
Cylindrical |
Conical |
Cylindrical |
Conical |
||||||
Structural variations | -01 | -02 | -03 | -03Л | -04 | -01 | -02; -03 | -04 | -01 | -02 |
Acc. to GOST 12815-80 | ||||||||||
1; 2; 3; 4; 5 | 1; 2; 3; 4; 5; 7 | |||||||||
Nominal pressure*, MPа | 6,3; 16; 25 | 6,3 | 2,5 | 4 | 25 | 50 | 1,6; 2,5; 4; 6,3 | 1,6; 2,5; 4; 6,3; 10; 16 | ||
Extermal diameter, mm | 16; 14; 12 | 12; 10; 8 | 12; 10; 8; 6 | 8 | 17 |
Cone |
16; 20 | 22; 35 | ||
Connection to the process | М27×2; М20×1,5 | М20×1,5; М18×1,5 | М20×1,5; М18×1,5; М16×1,5 | М20×1,5; М14×1,5; G1/2; G1/4 | М20×1,5; G1/2 | М33×2; G3/4 | — |
flanges |
||
Connection to the sensor | М20×1,5 (other types of thread are possible upon the Customer’s request) | Mounting with a male screw (hole diameter 11, 13, 14, 18 mm) | Mounting with a male screw (hole diameter 6 mm) | Collet mechanism (hole diameter. 6 mm) | M20×1,5 | |||||
Material | 12H18N10Т (other materials are possible upon the Customer’s request) | |||||||||
Sleeve type | GZ-015 | GZ-016 | GZ-017 |