Reinforced fiberglass enclosures RIZURBOX-C MULTI

RizurBox-C fiberglass enclosures have a multilayer structure of the body and are made of inflammable unsaturated polyester resin and glass-reinforced materials. The housing is antistatic.

The outer and inner covers of enclosures are separated by a heat-insulation layer made of polyurethane foam. The K FLEX ALU additional heat-insulation layer can be applied on request.


RizurBox-С reinforced fiberglass enclosures (thermoboxes) are manufactured according to TU-3442-001-12189681-2014 and are designed for the placement of control and measuring equipment, as well as telecommunication equipment (pressure sensors, flow meters, water gauges, network devices, check valves, etc.) both in outdoor and indoor facilities. RizurBox-С are weather-resistant enclosures designed to protect equipment against low temperatures, condensation, precipitation, dust, chemicals, physical damage, unauthorized access, theft, etc.

RizurBox-C reinforced fiberglass enclosures are designed to be used in indoor and outdoor areas exposed to explosion hazards in accordance with specified requirements, relevant industrial safety guidelines, and the manufacturer’s recommendations. All enclosures are made from inflammable materials and have fire-safety certificate № АПБ.RU.OC005.H.00093

The safety operation of enclosures at the hazardous areas is confirmed by the Customs Union compliance certificate "Safety of equipment intended for use in explosive atmospheres" № ЕАЭС RU C-RU.ME92.B.00041/19 

Installation area
Explosion-hazardous areas V-1a and V-1d, acc. to Electrical installation code (PUE), Ch. 7.3
Ingress protection
IP54 acc. to GOST 14254-96
IP65 acc. to GOST 14254-96 (on request)
IP66 acc. to GOST 14254-96 (on request)
Surface resistance (antistatic)
under 109 Оm
Temperature maintained inside (depending on the type of heating and the heater's parameters)     -40°С ... +50°С
Operating temperature
-60°С ... +70°С
-70°С ... +70°С (with additional heat insulation K-Flex)
Resistivity
to oil products
to chemical environments
to UV radiation
Wall thickness
20 ... 40 mm (depending on the enclosure's design variant)
Fiberglass thickness
2 ... 4 mm (depending on the enclosure's design variant)
Thermal conductivity
0,03 W/m*К
Fitting materials (locks, hinges)
stainless steel
Explosion protection marking (with steam/water heating):
- steam/water heating below 195 °C
- steam/water heating below 135 °C
- steam/water heating below 95 °C
- steam/water heating below 80 °C
Ex II Gb IIC T3 X II Gb IIC T3 X
Ex II Gb IIC T4 X II Gb IIC T4 X
Ex II Gb IIC T5 X II Gb IIC T5 X
Ex II Gb IIC T6 X II Gb IIC T6 X
Explosion protection marking (without heating):
- without heating
Ex II Gb IIC II Gb IIC
Colour
RAL 7035  light-grey 
any colour (on request)
Warranty period
12 months
24/36 months (on request)
Average operation time
over 15 years


Standard dimensions of RizurBox-C-М "MULTI" enclosures 

chert_CM2.png
 
Dimensional specifications of RizurBox-C-M enclosures
Design variant
Dimensions, mm External dimensions
(walls only), mm
Internal dimensions, mm
H1 W1 D1 H2 D2 W2 H3 D3 W3
RizurBox-С-M1 480 310 360 430 260 360 370 200 300
RizurBox-С-M2 700 500 360 650 450 360 600 400 310
RizurBox-С-M3 810 610 560 760 560 560 700 500 500
RizurBox-С-M4 548 548 500 500 500 500 450 450 450
RizurBox-С-M5 612 452 400 660 400 400 500 340 340
RizurBox-С-M6 718 518 456 560 460 456 600 400 396
RizurBox-С-M7* - - - 350 440 420 - - -
RizurBox-С-M8* - - - 500 440 420 - - -
RizurBox-С-M9* - - - 385 265 200 - - -
RizurBox-С-M10* - - - 380 430 430 - - -
*precise dimensions are to be requested 

0
Send request