Reinforced fiberglass modular enclosures
RizurBox-C fiberglass enclosures have a multilayer structure of the body and are made of inflammable unsaturated polyester resin and glass-reinforced materials. The housing is antistatic.
The outer and inner covers of enclosures are separated by a heat-insulation layer made of polyurethane foam. The K FLEX ALU additional heat-insulation layer can be applied on request.
RizurBox-С reinforced fiberglass enclosures (thermoboxes) are manufactured according to TU-3442-001-12189681-2014 and are designed for the placement of control and measuring equipment, as well as telecommunication equipment (pressure sensors, flow meters, water gauges, network devices, check valves, etc.) both in outdoor and indoor facilities. RizurBox-С are weather-resistant enclosures designed to protect equipment against low temperatures, condensation, precipitation, dust, chemicals, physical damage, unauthorized access, theft, etc.
RizurBox-C reinforced fiberglass enclosures are designed to be used in indoor and outdoor areas exposed to explosion hazards in accordance with specified requirements, relevant industrial safety guidelines, and the manufacturer’s recommendations. All enclosures are made from inflammable materials and have fire-safety certificate № АПБ.RU.OC005.H.00093
The safety operation of enclosures at the hazardous areas is confirmed by the Customs Union compliance certificate "Safety of equipment intended for use in explosive atmospheres" № ЕАЭС RU C-RU.ME92.B.00041/19
Installation area |
Explosion-hazardous areas V-1a and V-1d, acc. to Electrical installation code (PUE), Ch. 7.3 |
|
Ingress protection |
IP54 acc. to GOST 14254-96 IP65 acc. to GOST 14254-96 (on request) IP66 acc. to GOST 14254-96 (on request) |
|
Surface resistance (antistatic) |
under 109 Оm | |
Temperature maintained inside (depending on the type of heating and the heater's parameters) |
-40°С ... +50°С | |
Operating temperature |
-60°С ... +70°С -70°С ... +70°С (with additional heat insulation K-Flex) |
|
Resistivity |
to oil products to chemical environments to UV radiation |
|
Wall thickness |
20 ... 40 mm (depending on the enclosure's design variant) | |
Fiberglass thickness |
2 ... 4 mm (depending on the enclosure's design variant) | |
Thermal conductivity |
0,03 W/m3 | |
Fitting materials (locks, hinges) |
stainless steel |
|
Explosion protection marking (with steam/water heating): | ||
- steam/water heating below 195 °C - steam/water heating below 135 °C - steam/water heating below 95 °C - steam/water heating below 80 °C |
II Gb IIC T3 X II Gb IIC T4 X II Gb IIC T5 X II Gb IIC T6 X |
|
Explosion protection marking (without heating): | ||
- without heating |
II Gb IIC |
|
Colour |
RAL 7035 light-grey any colour (on request) |
|
Warranty period |
12 months 24/36 months (on request) |
|
Average operation time |
over 15 years |
Reinforced fiberglass modular enclosures with one door |
||
|
Design variant |
Dimensions H х W х D, mm |
RizurBox-C-D1 | 1100 х 700 х 700 | |
RizurBox-C-D2 | 1100 х 900 х 700 | |
RizurBox-C-D3 | 1100 х 1100 х 700 | |
RizurBox-C-D4 | 1100 х 1300 х 700 | |
RizurBox-C-D5 | 1100 х 900 х 900 | |
RizurBox-C-D6 | 1100 х 1100 х 900 | |
RizurBox-C-D7 | 1100 х 1300 х 900 | |
RizurBox-C-D8 | 1600 х 700 х 700 | |
RizurBox-C-D9 | 1600 х 900 х 700 | |
RizurBox-C-D10 | 1600 х 1100 х 700 | |
RizurBox-C-D11 | 1600 Х 1300 х 700 | |
RizurBox-C-D12 | 1600 х 900 х 900 | |
RizurBox-C-D13 | 1600 х 1100 х 900 | |
RizurBox-C-D14 | 1600 х 1300 х 900 | |
RizurBox-C-D15 | 2100 х 700 x 700 | |
RizurBox-C-D16 | 2100 х 900 x 700 | |
RizurBox-C-D17 | 2100 х 1100 x 700 | |
RizurBox-C-D18 | 2100 х 1300 x 700 | |
RizurBox-C-D19 | 2100 х 900 х 900 | |
RizurBox-C-D20 | 2100 х 1100 х 900 | |
RizurBox-C-D21 | 2100 х 1300 х 900 |
Reinforced fiberglass modular enclosures with two doors |
||
Design variant |
Dimensions H х W х D, mm | |
RizurBox-C-DD1 | 1100 х 1500 х 700 | |
RizurBox-C-DD2 | 1100 х 1900 х 700 | |
RizurBox-C-DD3 | 1100 х 2100 х 700 | |
RizurBox-C-DD4 | 1100 х 1500 х 900 | |
RizurBox-C-DD5 | 1100 х 1900 х 900 | |
RizurBox-C-DD6 | 1100 x 2100 x 900 | |
RizurBox-C-DD7 | 1600 x 1500 x 900 | |
RizurBox-C-DD8 | 1600 x 900 x 700 | |
RizurBox-C-DD9 | 1600 x 2100 x 700 | |
RizurBox-C-DD10 | 1600 х 1500 x 900 | |
RizurBox-C-DD11 | 1600 x 1900 x 900 | |
RizurBox-C-DD12 | 1600 x 2100 x 900 | |
RizurBox-C-DD13 | 2100 x 1500 x 700 | |
RizurBox-C-DD14 | 2100 x 1900 x 700 | |
RizurBox-C-DD15 | 2100 x 2100 x 700 | |
RizurBox-C-DD16 | 2100 x 1500 x 900 | |
RizurBox-C-DD17 | 2100 х 1900 х 900 | |
RizurBox-C-DD18 | 2100 х 2100 х 900 |
-
ENCLOSURES AND PROTECTIVE SUNSHADES RIZURBOX for WEB.pdfSize: 2 Mb20.04.2024
-
Inquiry form. RizurBox-C.pdfSize: 872 Kb20.04.2024
-
Fire safety certificate for RizurBox.pdfSize: 3 Mb20.04.2024
-
Conformity certificate for ex-proof heating equipment.pdfSize: 10 Mb20.04.2024
-
Patent RizurBox.pdfSize: 528 Kb20.04.2024
-
Conformity certificate for RizurBox.pdfSize: 2 Mb20.04.2024
-
Declaration of conformance for RIZUR heating equipment.pdfSize: 286 Kb20.04.2024
-
Conformity certificate for RizurBox series.pdfSize: 707 Kb20.04.2024