Level measurement and control

Reinforced fiberglass enclosures RIZURBOX-C CASE

1 / 2

RizurBox-C fiberglass enclosures have a multilayer structure of the body and are made of inflammable unsaturated polyester resin and glass-reinforced materials. The housing is antistatic.

The outer and inner covers of enclosures are separated by a heat-insulation layer made of polyurethane foam. The K FLEX ALU additional heat-insulation layer can be applied on request.

Download description

Add to cart Added to cart Error

Go to cart

Description Characteristics Gallery Files

RizurBox-С reinforced fiberglass enclosures (thermoboxes) are manufactured according to TU-3442-001-12189681-2014 and are designed for the placement of control and measuring equipment, as well as telecommunication equipment (pressure sensors, flow meters, water gauges, network devices, check valves, etc.) both in outdoor and indoor facilities. RizurBox-С are weather-resistant enclosures designed to protect equipment against low temperatures, condensation, precipitation, dust, chemicals, physical damage, unauthorized access, theft, etc.

RizurBox-C reinforced fiberglass enclosures are designed to be used in indoor and outdoor areas exposed to explosion hazards in accordance with specified requirements, relevant industrial safety guidelines, and the manufacturer’s recommendations. All enclosures are made from inflammable materials and have fire-safety certificate № НСОПБ.RU.ПР004.Н.00026.

The safety operation of enclosures at the hazardous areas is confirmed by the Customs Union compliance certificate "Safety of equipment intended for use in explosive atmospheres" № ЕАЭС RU C-RU.ME92.B.00041/19

Description Characteristics Gallery Files

Installation area		Explosion-hazardous areas V-1a and V-1d, acc. to Electrical installation code (PUE), Ch. 7.3
Ingress protection		IP54 acc. to GOST 14254-96 IP65 acc. to GOST 14254-96 (on request) IP66 acc. to GOST 14254-96 (on request)
Surface resistance (antistatic)		under 10⁹ Оm
Temperature maintained inside (depending on the type of heating and the heater's parameters)		-40°С ... +50°С
Operating temperature		-60°С ... +70°С -70°С ... +70°С (with additional heat insulation K-Flex)
Resistivity		to oil products to chemical environments to UV radiation
Wall thickness		20 ... 40 mm (depending on the enclosure's design variant)
Fiberglass thickness		2 ... 4 mm (depending on the enclosure's design variant)
Thermal conductivity		0,03 W/m*K
Fitting materials (locks, hinges)		stainless steel
Explosion-proof marking
with RIZUR-OShA-R heaters		1 Ex e mb IIC(T3....T6)Gb X
Explosion protection marking (with steam/water heating):
- steam/water heating below 195 °C - steam/water heating below 135 °C - steam/water heating below 95 °C - steam/water heating below 80 °C		II Gb IIC T3 X II Gb IIC T4 X II Gb IIC T5 X II Gb IIC T6 X
Explosion protection marking (without heating):
- without heating		II Gb IIC
Colour		RAL 7035 light-grey any colour (on request)
Warranty period		12 months 24/36 months (on request)
Average operation time		over 15 years

Standard dimensions of RizurBox-C-B enclosures "CASE"

Dimensional specifications of RizurBox-C-B «CASE»
Design variant	Dimensions, mm			External dimensions (walls only), mm			Internal dimensions, mm
Design variant	H1	W1	D1	H2	D2	W2	H3	D3	W3
RizurBox-С-B-M	810	1350	550	810	1300	500	750	1240	440
RizurBox-С-B2-M*	-	-	-	750	1210	760	-	-	-
RizurBox-С-B2-B*	-	-	-	900	1210	760	-	-	-
RizurBox-С-B2-H*	-	-	-	530	470	760	-	-	-
RizurBox-С-B2-L	1100	1215	760	1040	1160	700	980	1090	640
RizurBox-С-B2-Lm	1080	1300	790	1080	1250	740	990	1160	650
RizurBox-С-B3-M*	-	-	-	750	920	760	-	-	-
RizurBox-С-B3-B	870	1000	750	870	950	700	810	890	640
RizurBox-С-B3-H*	-	-	-	900	920	760	-	-	-
RizurBox-С-B3-L*	-	-	-	1100	920	760	-	-	-
RizurBox-С-B4-H*	-	-	-	900	1520	760	-	-	-
RizurBox-С-B4-L*	-	-	-	1100	1520	760	-	-	-
RizurBox-С-B4M	750	1520	770	710	1470	720	640	1390	650
RizurBox-С-B5B	640	940	540	640	890	490	590	830	430